Recovery Board Mount Tubular Clamps Mini

Description

Click here to see our customized printable measuring PDF. This will help you ensure you order the correct size!

Item's not listed as pre-order ship promptly within a few days. If you need expedited shipping, please email us at info@gziladesigns.com.

Looking to mount a pair or two recovery boards to your rig; we got you covered! You can mount your boards using six different index-able positions to give you the perfect setup you desire! Slot spacing is based on approx. 4.75" to 5.50" spacing which works with X-Bull, TRED 800 and TRED 1100 boards. Please double check yours to ensure fitment before ordering.

Fitment

Click here to see our customized printable measuring PDF. This will help you ensure you order the correct size!

For a variety of roof racks. To ensure fitment, be sure to measure the diameter of your tubing before ordering. If you order the wrong size, you will be responsible for shipping back to us BEFORE we send you another set.

These do not come with any kind of mounting pins. You will have to either use the ones that came with your boards or figure out a DIY setup.

Common Roof Rack Sizes:
4Runner TRD PRO (2019-2024) = 1.75"
FJ Cruiser (2007-2014) = 1.75"
Sequoia TRD PRO (2020-2022) = 1.75"
GOBI Racks for Toyota = 1.00"

Please note if you have a roof top tent on your roof rack, these clamps may possibly not fit, or the items you are mounting may not clear your tent if it is a larger model. We cannot cover the costs of a return label and refund the original shipping if a fitment issue arises. Many customers use my products with RTTs, but given the variables of different vehicles, racks, and tents; it may not always work.

Coating

Only offered in regular coat black anodizing. Anodizing can fade over time. You can apply some wax or UV coat regularly to help prevent fading.

Tumbled and deburred to remove machine marks for the perfect finish.

Hardware

4x 5/16-18 x 3/4 socket head screw 18-8 stainless steel

2x 5/16-18 x 5/8 socket head screw 18-8 stainless steel

4x 10-32 x 5/8 cup point socket set screw 18-8 stainless steel

Specs

6061-T6511 USA aluminum.

Designed and machined in the USA.

Lifetime warranty.

Shipping

Once your item is scanned in with USPS or UPS, we can longer be responsible for it. If it gets delayed, lost, or stolen, you will have to handle that on your own. In the event of theft, you would need to file a police report. We will not send replacements for items that are shown as "delivered".

When buying this item, you will have the following choices upon checkout. Due to high order volume, we try to get your order shipped out within a week, often times within a day. When you receieve an email of a tracking number, that doesn't necessarily mean it was shipping / dropped off that day. If you need a faster option that isn’t offered, please contact us and we can help as best we can to upgrade shipping!

USA Buyers:
-USPS First Class ($5.00): Only available on small or light items. Typical transit times are 5-15 days depending how far you are located from our shipping headquarters in Orlando Florida. Does not include any insurance.
-USPS Priority Mail ($11.00): Typical transit times are 2-5 days depending how far you are located from our shipping headquarters in Orlando Florida. Includes $100 of insurance.
-UPS Ground ($13.00): Typical transit times are 1-5 days depending how far you are located from our shipping headquarters in Orlando Florida. Includes $100 of insurance.

International Buyers:
-USPS First Class ($13.00 - $18.00): Only available for small or light items. Since the pandemic started, this shipping option has been very slow. Often times it can sit in USA Customs for a long time. There is also a chance once it leaves USA that tracking information will not update.
-USPS Priority Mail ($27.00 - $35.00): Typical transit times are 5-20 days depending how fast USA Customs is in processing the order.
-UPS (to select countries) is also a faster, but more expensive choice.
-Note you are responsible for any Customs / Duties / Taxes that your country may charge you once it arrives to you. We have no way of knowing how much it will be.

Recovery Board Clamp Mini

Superb seller.. order was promptly packaged and shipped! the clamp was made of pretty solid material.. it was used to mount the recovery boards onto the side of the Yakima OffGrid basket.. worked perfectly! I had purchased the 1.25" size clamp, and it had a little bit of clearance gap around the tube, so if anyone is trying to also get a mount for their Yakima OffGrid, then I'd recommend going even smaller, perhaps a 1" size would be absolutely perfect.. I ended up lining the inside of the clamp with rubber stripping for a tight and secure clamp.. it would also be amazing if these clamps came with a rubber lining inside for best grip! instead of metal to metal.. but overall, absolutely satisfied! looking forward to buying more of Gzila products! thanks!!! A+++++

Sure fit!

Original I made a big mistake ordering the XL for my Xbull board, they able to send a correct one soon it was available. Used 3/8 hardware all around since 5/16 wingnuts are out of stock at my local big box stores. It’s my 3rd GZila mount, top notch quality and fast shipping with great customer service.

Awesome product.

Perfect fit for TRD PRO Rack

Quality - Functional brackets!

These worked perfect for my Voyager Low Profile rack with 1” tubing, on my Discovery 2. Very well build with a lot of adjustability.

Great product

Very well machined product and perfect for our application to add maxtrax to the luggage rack.

Grills

Love your traction board mounts. They fit and feel they at to the look of the truck.

Harbor Freight

Loved the mounts! Great quality, great mounts! Shipped it quick since I needed them for a last second trip! Definitely recommend and would buy again! P.S. the Harbor Freight Roof Rack is a “1.00”

Awesome!

Product is awesome and product got here in less than a week!

Outstanding Product!!

Hands down on this product! I used this for my MAXTRAX MKII traction board along with the mounting pins onto my Yakima Loadwarrior roof basket. The 1" diameter fit and snug well onto the bars. You guys are genius creating these products!

Quality!

The mounts work well for our X-Bull recovery boards. They seem like they will hold up well and the fit is perfect for the 1.75” 4Runner TRD pro round bars. Very happy with this product!

1 2 3

Recovery Board Mount Tubular Clamps Mini

Customer Reviews